How to choose a gas spring

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-07
Views:0

(Summary description)There are 4 types of joints for compression gas springs: single-piece, single-ear, double-ear and universal ball head, which are single-piece type, single-ear type, double-ear type and universal ball head type.

How to choose a gas spring

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-07
Views:0

Information

There are 4 types of joints for compression gas springs: single-piece, single-ear, double-ear and universal ball head, which are single-piece type, single-ear type, double-ear type and universal ball head type. When designing, the matching joint type should be selected according to the specific conditions of the installation site and the gas spring specifications.

It is recommended to use the universal ball head type. This type of gas spring can automatically adjust the connection angle during the working process, so as to eliminate the lateral force during the operation of the gas spring, especially suitable for occasions that require high installation accuracy. If the installation space is limited, the single-ear type can be used. This type of gas spring has a simple structure and requires little space for installation. However, the lateral force caused by different shafts cannot be eliminated during the working process. Therefore, it is necessary to design a gas spring pin. The shaft is connected to it. In short, no matter what type of joint is selected, it must be ensured that after the gas spring is installed, the door (cover) opens and closes smoothly without interference and jamming.

Keyword:

Scan the QR code to read on your phone

Previous: How to deal with deformation of gas spring after heat treatment

Next: Installation precautions for stainless steel gas springs

Previous: How to deal with deformation of gas spring after heat treatment

Next: Installation precautions for stainless steel gas springs