search
NEWS CENTER

Problems that should be paid attention to when using the expansion tank

(Summary description)The installation position of the expansion tank should be considered to prevent the freezing of the water in the tank. If the tank is installed in a non-heated room, insulation should be considered.

Problems that should be paid attention to when using the expansion tank

(Summary description)The installation position of the expansion tank should be considered to prevent the freezing of the water in the tank. If the tank is installed in a non-heated room, insulation should be considered.

Information

(1) The installation position of the expansion tank should be considered to prevent the freezing of the water in the tank. If the tank is installed in a non-heated room, insulation should be considered.
(2) It is strictly forbidden to install valves on expansion pipes, overflow pipes and circulation pipes, and valves should be installed on drain pipes and signal pipes. The valve on the signal pipe should be located in a room where people can easily observe and check, and the valve should be about 1.5~1.8m off the ground.

(3) Expansion pipes, circulation pipes and signal pipes located in non-heated rooms should be insulated.
(4) The lower part of the water tank should be used as a support. The length of the support should exceed the bottom plate by 100~200mm, and its height should be greater than 300mm. The support material can be square wood, reinforced concrete or brick.
(5) The outer wall between the water tanks should consider the installation of reserved holes.
(6) Generally, the water temperature in the open expansion tank should not exceed 95℃.
 

Keyword:

Scan the QR code to read on your phone

Previous
1
2
24

CONTACT US

contact
Skype: yaoting91
Whatsapp: +8615151546387
contact
Wechat : +8615151546387
QQ : 1019947174
language
中国
韩国
韩国
韩国
韩国
韩国

ONLINE MESSAGE

留言应用名称:
bottom
描述:
img

ONLINE MESSAGE

留言应用名称:
bottom
描述:
验证码
Copyright © 2021  JVT AUTO PARTS CO., LTD   苏ICP备2021013925号  IPV6