Daily common faults of gas springs

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-20
Views:0

(Summary description)Stop the car after driving 10km on a road with poor road conditions, and touch the shock absorber shell with your hand.

Daily common faults of gas springs

(Summary description)Stop the car after driving 10km on a road with poor road conditions, and touch the shock absorber shell with your hand.

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-20
Views:0

Information

1. Stop the car after driving 10km on a road with poor road conditions, and touch the shock absorber shell with your hand. If it is not hot enough, it means that there is no resistance inside the shock absorber and the shock absorber does not work. At this time, appropriate lubricating oil can be added, and then the test is carried out. If the outer casing is hot, it means that the shock absorber is short of oil, and sufficient oil should be added; otherwise, the shock absorber is invalid.

2. When the car runs slowly and brakes urgently, if the car vibrates violently, it means that there is a problem with the shock absorber.
3. Press the bumper hard, then release, if the car jumps 2~3 times, the shock absorber is working well.
4. Remove the shock absorber and stand it upright, and clamp the lower end connecting ring on the vise, and pull and press the shock absorber rod several times. At this time, there should be a stable resistance. , If the resistance is unstable or no resistance, it may be due to lack of oil inside the shock absorber or damage to the valve parts, which should be repaired or replaced.

Keyword:

Scan the QR code to read on your phone

Previous: Reasonable use of gas springs

Next: How to deal with deformation of gas spring after heat treatment

Previous: Reasonable use of gas springs

Next: How to deal with deformation of gas spring after heat treatment