Precautions for installation of case backhoe coolant tank
- Categories:Coolant tank Products News
- Author:
- Origin:
- Time of issue:2021-08-29
- Views:0
(Summary description)During the pre-installation of the case backhoe coolant tank, it is necessary to check the preparations and check whether the size and dimensions of the case backhoe coolant tank are the same as previously confirmed.
Precautions for installation of case backhoe coolant tank
(Summary description)During the pre-installation of the case backhoe coolant tank, it is necessary to check the preparations and check whether the size and dimensions of the case backhoe coolant tank are the same as previously confirmed.
- Categories:Coolant tank Products News
- Author:
- Origin:
- Time of issue:2021-08-29
- Views:0
During the pre-installation of the case backhoe coolant tank, it is necessary to check the preparations and check whether the size and dimensions of the case backhoe coolant tank are the same as previously confirmed. Then carefully check whether there are scratches on the surface of the tank during transportation, and make sure that there is no obvious damage after the next installation.
Secondly, according to the size of the case backhoe coolant tank, determine whether the spacing of the steel tanks used to install the water tank is appropriate. This method is to fix the connection point of the steel channel position. Here, we must remember to use a horizontal ruler for proofreading to ensure the entire horizontal plane. It is flat and is being welded, thus completing the welding of the chassis.
In the installation inspection of the case backhoe coolant tank, pay attention to the position of the qualified water tank bottom plate in the middle of the bottom frame to achieve the effect of fixing the bottom. The side fixing plates should also be welded in order. Each fixed board should be tested with a horizontal ruler to ensure that there are no errors before proceeding to the next installation.
In the latter step of the installation, the qualified case backhoe coolant tank cover is fixed above the side plate, and a column for fixing is added to the intermediate space between the connection middle and the bottom of the water tank. The fixed plate is covered to ensure the overall flatness and stability of the entire case backhoe coolant tank system.
Scan the QR code to read on your phone
PRODUCTS CENTER
CONTACT US
TEL: +86-0511-86385672
Phone: +86-15151546387
E-mail: info@jvtparts.com
Skype: yaoting91
Whatsapp: +8615151546387
Wechat : +8615151546387
QQ : 1019947174
ONLINE MESSAGE
ONLINE MESSAGE
